Choose the right birthstone that suits you

Ring Size

How to Measure Accurate Ring Size With International Ring Sizer,measure ring size,ring size,ring sizer,international ring sizer,correct ring size,accurate ring size

Once you have selected your precious stone and the ring design you need to specify your ring size so that we make your ring to exacting standards and then consecrate and energize it in our temple before sending it to you. There are two methods to measure your ring size:

1) Getting your ring size measured by the local jeweler (Highly recommended)

Visit your local jewelry shop and request the jeweler to take measurement of the finger you want the ring for. This is a 5 minute procedure in which the jeweler will take your ring size using a standard steel ring size measure made of different loops. Given below is the table of ring sizes of each country. Please specify us the United States and Canada, Australia, New Zeland, India  ring size.

Take measurement only with a steel ring measure. Avoid measurement with copper or plastic ring measures as a degree of inaccuracy creeps in.

Avoid taking measurement just after a hot bath, exercise, or a very cold day as water levels in the body fluctuate during these occasions and a degree of inaccuracy might creep in.

2) Determine Your Ring Size Yourself

Your Ring should fit your finger comfortably; snug enough so that it will not fall off, but loose Enough to slide over your knuckle.

Finger size Changes depending on the time of day and the weather for best results measure your finger size:

1.At the end of the day and when your fingers warm (Fingers re smaller in the early morning and when cold.)

2.Measure finger size 3 to 4 times to eliminate an erroneous reading.

Measuring Ring Size Using A Piece of String:
  • Use a piece of string or Thread and wrap it around the finger you want to measure
  • Mark the point on the string where it completely wraps around your finger and forms a circle
  • Unwrap the string and measure the length up to the mark you have made
  • The length of the string should be the circumference of the ring size you are buying, Use the chart below
  • In case the length of the thread falls between 2 sizes, Then use the Bigger ring size
International Ring Size Measurement
Inside Diameter Inside Circumference Ring Sizes  
(in) (mm) (in) (mm) United States & Canada United Kingdom, Ireland, Australia & New Zealand India
0.458 11.63 1.44 36.5 0
0.466 11.84 1.46 37.2 ¼
0.474 12.04 1.49 37.8 ½ A
0.482 12.24 1.51 38.5 ¾
0.49 12.45 1.54 39.1 1 B
0.498 12.65 1.56 39.7
0.506 12.85 1.59 40.4 C
0.514 13.06 1.61 41 1
0.522 13.26 1.64 41.7 2 D 2
0.53 13.46 1.67 42.3
0.538 13.67 1.69 42.9 E 3
0.546 13.87 1.72 43.6 4
0.554 14.07 1.74 44.2 3 F
0.562 14.27 1.77 44.8 5
0.57 14.48 1.79 45.5 G
0.578 14.68 1.82 46.1 6
0.586 14.88 1.84 46.8 4 H
0.594 15.09 1.87 47.4 7
0.602 15.29 1.89 48 I 8
0.61 15.49 1.92 48.7 J 9
0.618 15.7 1.94 49.3 5
0.626 15.9 1.97 50 K 10
0.634 16.1 1.99 50.6
0.642 16.31 2.02 51.2 L 11
0.65 16.51 2.04 51.9 6 12
0.658 16.71 2.07 52.5 M
0.666 16.92 2.09 53.1 13
0.674 17.12 2.12 53.8 N
0.682 17.32 2.14 54.4 7 14
0.69 17.53 2.17 55.1 O 15
0.698 17.73 2.19 55.7
0.706 17.93 2.22 56.3 P 16
0.714 18.14 2.24 57 8 17
0.722 18.34 2.27 57.6 Q
0.73 18.54 2.29 58.3 18
0.738 18.75 2.32 58.9 R 19
0.746 18.95 2.34 59.5 9
0.754 19.15 2.37 60.2 S 20
0.762 19.35 2.39 60.8 21
0.77 19.56 2.42 61.4 T
0.778 19.76 2.44 62.1 10 22
0.786 19.96 2.47 62.7 10¼ U 23
0.794 20.17 2.49 63.4 10½
0.802 20.37 2.52 64 10¾ V 24
0.81 20.57 2.54 64.6 11 25
0.818 20.78 2.57 65.3 11¼ W
0.826 20.98 2.59 65.9 11½ 26
0.834 21.18 2.62 66.6 11¾ X
0.842 21.39 2.65 67.2 12 27
0.85 21.59 2.67 67.8 12¼ Y 28
0.858 21.79 2.7 68.5 12½ Z
0.866 22 2.72 69.1 12¾ 29
0.874 22.2 2.75 69.7 13 30
0.882 22.4 2.77 70.4 13¼ Z1
0.89 22.61 2.8 71 13½ 31
0.898 22.81 2.82 71.7 13¾ Z2 32
0.906 23.01 2.85 72.3 14 Z3
0.914 23.22 2.87 72.9 14¼ 33
0.922 23.42 2.9 73.6 14½ Z4
0.93 23.62 2.92 74.2 14¾ 34
0.938 23.83 2.95 74.8 15 35
0.946 24.03 2.97 75.5 15¼
0.954 24.23 3 76.1 15½ 36
0.962 24.43 3.02 76.8 15¾
0.97 24.64 3.05 77.4 16 37